Stocks AG Fan Jet Duo Plus VS-2 130, Оригинальное руководство по эксплуатации и список запасных частей

Страница: 10 / 30

10
9.1 Clearing a blockage
Switch off the main power switch on the control panel
Ensure the parent machine is stationary, switched off, and parked on level ground
Ensure the main power switch on the control panel is off and unplug the 2 core power supply cable from the
control box or disconnecting the power cable from the vehicle battery.
Ensure appropriate personal protection equipment is worn for the product being applied
Ensure any product removed is put back into its original container
Care to be taken not to spill any product that could contamination the environment.
Empty the hopper of any remaining product
9.2 Hopper removal
Removing the hopper for cleaning and maintenance
Ensure the hopper is completely empty and free from any product residue Ensure appropriate personal
protection equipment is worn for the product being applied
Release the rubber lid retaining straps and remove the lid.
The hopper can then be lifted away after removing the
retaining plate(s) from within the hopper by releasing the
M8 external fixing nuts and washers.
NOTE When replacing the hopper ensure the Gasket fitted
under the base of the hoper is in good order
Replace if damaged; part number FJ017S
9.3 Storage
Disconnect the power supply by unplugging the power cable
or removing the 60amp fuse in the power cable if storing
the machine for long periods.
It is the responsibility of the operator to ensure the hopper
and feed block assembly’s are free of product after each use
and cleaned thoroughly before storage.
Store in dry conditions to protect the machine and control
system from moisture . Always clean and spray electrical connectors with a moisture repellent spray when not
in use for long periods.
9.4 Optional PVC Waterproof Covers
Heavy duty White PVC covers fitted with eyelets and bungie cord for easy attachment available for all
machines (see page 16)
Please contact your locals Stocks AG dealer for more information
9 .5 Disposal
Ensure that any persons handling the machine are aware that the machine may have been used to
apply toxic chemicals and so the appropriate personal protection equipment should be worn.
Ensure the hopper contents have been removed and any toxic residue removed and put back into a sealed
container or disposed of in accordance with the manufacturers guidelines to eliminate any possible
contamination of others or the environment
Always adhere to the local disposal regulations paying particular attention to the plastics, rubber,
and electrical components .