Still RX70-20/600 Скачать руководство пользователя

Страница: 268 / 432

NOTE

The pictograms are affixed according to the

attachment fitted at the factory. If an attach-

ment with different functions is fitted, the au-

thorised service centre must check that the

pictograms bear the correct representation

and must change them if necessary.

Clamp locking mechanism (variant)

This truck can be fitted with a clamp locking

mechanism for clamping attachments. This

prevents the clamp from opening unintention-

ally if the operating function is inadvertently

triggered.

DANGER

If the correct function of the clamp locking mecha-

nism is not guaranteed, there is a risk to life from a

falling load!
If other attachments are used on this truck in addition

to the clamp, make sure that the function of the

clamp locking mechanism is reassigned to the corre-

sponding operating device every time the clamp is

refitted. See the section entitled "Fitting attach-

ments".

–

Make sure that the additional clamp locking mech-

anism function is available.

NOTE

For technical reasons, clamping attachments

must not be controlled via the "5th function".

Operation

Attachments

254

57368011501 EN - 10/2020 - 04

Содержание RX70-20/600

















































































































































































































































































































































































































































Результаты поиска

Содержание RX70-20/600

Отзывы:

Похожие инструкции для RX70-20/600

Бренды по названию

Популярные бренды

Still RX70-20/600, Оригинальное руководство пользователя

Результаты поиска

Содержание RX70-20/600

Отзывы:

Похожие инструкции для RX70-20/600

Бренды по названию

Популярные бренды