Still RX70-20/600 Скачать руководство пользователя

Страница: 216 / 432

WARNING

There is a risk of injury when changing the fork arms;

the weight of the fork arms could cause them to fall

on your legs, feet or knees. The space to the left and

right of the fork is a danger area.

–

Always wear protective gloves and safety foot-

wear when changing the fork arms.

–

Ensure that no one stands in the danger area!

–

Do not pull on the fork arms.

–

The fork arms must always be carried by two peo-

ple; if necessary, use a hoist.

NOTE

●

For installation and removal, a transport

pallet is recommended for supporting the

fork arms. The pallet size depends on the

fork arm size used and should be dimen-

sioned such that the fork arms do not pro-

trude after being placed on the pallet. This

means the fork arms can be safely placed

down and transported.

●

Both fork arms can be pushed over to the

same side. It is possible to choose the side

via which the forks are removed

Operation

Lifting

202

57368011501 EN - 10/2020 - 04

Содержание RX70-20/600

















































































































































































































































































































































































































































Результаты поиска

Содержание RX70-20/600

Отзывы:

Похожие инструкции для RX70-20/600

Бренды по названию

Популярные бренды

Still RX70-20/600, Оригинальное руководство пользователя

Результаты поиска

Содержание RX70-20/600

Отзывы:

Похожие инструкции для RX70-20/600

Бренды по названию

Популярные бренды