Still RX70-20/600 Скачать руководство пользователя страница 137

Страница: 137 / 432

CAUTION

Opening the cylinder valve too quickly can lead to

the system icing over.

–

Open the cylinder valve slowly.

–

Open the cylinder valve (1) by slowly turn-

ing the star-grip handle anti-clockwise.

–

Check whether the smell of gas is evident.

–

Check whether the hose (2) is securely con-

nected to the gas cylinder.

–

Check to see whether the hose and con-

nection screw joints have iced over.

Opening the LPG cylinder valve for

a double-cylinder holder

DANGER

There is a risk of explosion if LPG es-

capes.
Escaping LPG may explode when ex-

posed to ignition sources and cause se-

rious accidents.

–

Do not smoke or use a naked flame/

lighter.

–

Do not start the engine.

–

Close the cylinder valve.

–

Notify your authorised service centre.

–

LPG cylinders should be opened in

well-ventilated spaces, away from

openings in the ground.

DANGER

Risk of explosion from spark discharge!

–

Do not use a striking tool when open-

ing and closing.

7311_136-003



Operation

Switching on and starting

123

57368011501 EN - 10/2020 - 04

Содержание RX70-20/600

















































































































































































































































































































































































































































Результаты поиска

Содержание RX70-20/600

Отзывы:

Still RX70-20/600, Оригинальное руководство пользователя, Страница: 137 / 432

Результаты поиска

Содержание RX70-20/600

Отзывы: