Still RX60-16 Скачать руководство пользователя страница 232

Страница: 232 / 412

Operation

Trailer operation

6321_003-116

– Push the coupling pin (2) down, turn 90°

and pull out.

– Adjust tiller height.

DANGER

People can become trapped between the truck and

trailer.
When hooking up, ensure that no one is between

the truck and trailer.

– Slowly move the truck back.
– By moving the truck back, introduce the tiller

into the recess (3) in the counterweight.

DANGER

If the coupling pin or securing bush are lost or

destroyed during towing, the trailer will work loose

and become uncontrollable. This causes a risk of

accident!
– Use only original coupling pins that have been

checked carefully.

– Ensure that the coupling pin is correctly inserted

and secured.

– Insert the coupling pin into the counter-

weight, press downwards against the spring

pressure and turn 90° (the coupling pin is

locked in this position).

– Remove any items used to prevent the

trailer from rolling away.

Uncoupling the trailer

– Take measures to prevent the trailer from

rolling away, e.g. use wheel chocks.

220

170525 EN - 10/2016

Содержание RX60-16





























































































































































































































































































































































































































Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды

Still RX60-16, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды