Still RX60-16 Скачать руководство пользователя страница 274

Страница: 274 / 412

Operation

Display messages

– Interrupt work and allow the truck to cool

down. Do not switch off the key switch.

NOTE

If the operational capacity is impaired, notify

your authorised service centre.

OVERHEATING message

If the message

OVERHEATING

appears

in the display, the traction motors have

overheated. The acceleration and the speed

of the truck are reduced.
– Allow the truck to cool down.
– If the error persists, contact your authorised

service centre.

CLOSE THE DOOR message

If the message

CLOSE THE DOOR

(variant)

appears in the display, the battery door is not

shut correctly. The truck will not move.
– Close the battery door.

LIFT HEIGHT message

Speed limitation with a raised load (variant)
This function makes sure that the truck can

only move slowly when a load is lifted.

DANGER

Risk of accident!
Before using this function, familiarise yourself with

the altered driving characteristics of the truck!
Optionally, the truck can have altered acceleration

behaviour and/or braking characteristics.

DANGER

Risk of accident!
Driving with a lifted load is prohibited, because the

truck can overturn due to the high centre of gravity.
Because the limits determined by physics cannot

be altered, the increased safety provided by this

function must not be misused in order to take safety

risks.

262

170525 EN - 10/2016

Содержание RX60-16





























































































































































































































































































































































































































Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды

Still RX60-16, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды