Still RX60-16 Скачать руководство пользователя страница 138

Страница: 138 / 412

Operation

Driving

Cause

Effect

If the emergency off switch is actuated, follow-

ing the emergency off function:

The truck will roll to a stop. If the truck is at

a standstill, you will hear the parking brake

engage and the LED (2) illuminates brieﬂy with

a steady light.

Automatic braking:

With the drive deactivated and the seat not

occupied or the truck being accelerated heav-

ily, the parking brake is applied with moderate

braking force.

"Safe parking" function

The "safe parking" function alerts the driver

if he/she leaves the driver’s seat or tries to

switches off the truck without applying the

parking brake. This function also prevents

the truck being switched off when the parking

brake is not applied.
This function is active in the following situati-

ons:
• The electric parking brake has not been

applied

• The electric parking brake has been applied

but has not been applied correctly as a

result of a malfunction

In both cases the function intervenes as

follows:
– If the driver tries to switch off the truck

when the parking brake is not applied or

the parking brake is faulty, the "PARKING

BRAKE: APPLY HANDBRAKE!" warning

message appears on the display and

operating unit.

– If the driver now leaves the truck without

applying the parking brake, a continuous

warning tone will also sound. The warning

tone will stop if the driver resumes his/her

position in the truck or if the driver applies

the parking brake.

– If the parking brake cannot be applied, the

truck also cannot be switched off without

taking other measures.

126

170525 EN - 10/2016

Содержание RX60-16





























































































































































































































































































































































































































Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды

Still RX60-16, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды