Still RX60-16 Скачать руководство пользователя страница 172

Страница: 172 / 412

Operation

Working with loads

6210_842-001

Adjusting the fork

– Lift the locking lever (1) and move the fork

arms to the desired position.

– Allow the locking lever to snap back into

place.

The load centre of gravity must be midway

between the fork arms.
– Only actuate the fork prong positioner

(variant) when the fork is not carrying a

load.

Danger area

The danger area is the area in which people

are at risk due to the movements of the truck,

its working equipment, its load-carrying

equipment (e.g. attachments) or the load.

Also included are the areas where loads

could fall or working equipment could fall or

be lowered.

DANGER

Risk of injury!
– Do not step on the fork.

DANGER

Risk of injury!
– Do not step under the raised forks.

DANGER

People may be injured in the danger area of the

truck!
The danger area of the truck must be completely

clear of all personnel, except the driver in his

normal operating position. If persons fail to leave

the danger area despite warnings:
– Cease work with the truck immediately.
– Secure the truck against use by unauthorised

parties.

160

170525 EN - 10/2016

Содержание RX60-16





























































































































































































































































































































































































































Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды

Still RX60-16, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды