Still RX60-16 Скачать руководство пользователя страница 90

Страница: 90 / 412

Operation

Checks and operations prior to commissioning

6321_003-041

Switching the seat heater (variant) on

and off

NOTE

The seat heater only functions if the seat

contact switch is active, i.e. when the driver is

sitting on the driver’s seat.

– Switch the seat heater (7) on or off using the

switch.

Adjusting the armrest

DANGER

There is a risk of accident if the armrest lowers sud-

denly, causing the driver to move in an uncontrolled

manner. This can result in unintentional actuation

of the steering or the operating devices and thus

cause uncontrolled movements of the truck or load.
– Do not adjust the armrest while driving.
– Adjust the armrest so that all operating devices

can be actuated safely.

– Ensure that the armrest is securely tightened.

7331_342-001

Adjusting the length of the armrest

– Release the star-grip handle (1) by turning

it anti-clockwise.

– Shift the armrest (2) into the desired posi-

tion.

– Tighten the star-grip handle by turning it

clockwise.

– Check that the armrest is ﬁrmly attached.

Adjusting the height of the armrest

– Release hand wheel (3) by turning it anti-

clockwise.

– Shift the armrest (2) into the desired posi-

tion.

170525 EN - 10/2016

Содержание RX60-16





























































































































































































































































































































































































































Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды

Still RX60-16, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды