Still RX60-16 Скачать руководство пользователя страница 311

Страница: 311 / 412

Operation

Handling the battery

CAUTION

Risk of damage!
The battery must be stored on a suitable beam

support or on suitable racking.
The battery must not be stored on a wooden beam

or anything similar.

– Set down the battery.

6210_003-040

6210_003-015

Battery reconnection

– Pick up the new battery and transport it to

the truck.

– Carefully insert the battery into the battery

compartment.

When doing so, ensure that
• Before inserting, the battery cable is posi-

tioned on the battery in such a way that it

will not become trapped when the battery is

inserted,

• the load-carrying equipment is at a right

angle to the forklift truck,

• The gaps are maintained for the entire time

that the battery is being inserted, and that

the battery is inserted to a sufﬁcient depth.

DANGER

Risk of crushing/shearing!
While inserting the battery, avoid

putting your hands between the

battery and the chassis.

CAUTION

Risk of damage!
– Position the battery cables on the

battery in such a way that they will

not be crushed when removing

or inserting the battery, or when

closing the battery door.

Once the battery is correctly positioned in the

battery compartment:
– Release the battery carefully.
– Carefully retract the load-carrying equip-

ment from under the battery.

170525 EN - 10/2016

299

Содержание RX60-16





























































































































































































































































































































































































































Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды

Still RX60-16, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-16

Отзывы:

Похожие инструкции для RX60-16

Бренды по названию

Популярные бренды