Still FXH 20 Скачать руководство пользователя

Страница: 23 / 140

Safety

Safety regulations for handling consumables

– Dispose of used battery acid in line with the

applicable regulations.

Disposal of consumables

ENVIRONMENT NOTE

Materials that have to be disposed of following

maintenance, repair and cleaning must be

systematically collected and disposed of in

accordance with regulations. Observe the

national regulations for your country. Work

may only be carried out in areas designated

for this purpose. Take care to minimise, as far

as possible, any impact on the environment.

• Any spillage of ﬂuids such as hydraulic oil,

brake ﬂuid or gear lubricant oil must be

immediately soaked up with an oil-binding

agent.

• The regulations for disposal of used oil are

applicable.

• Any spillage of battery acid must be neu-

tralised immediately.

11548011751 EN - 10/2018

Содержание FXH 20













































































































































Результаты поиска

Содержание FXH 20

Отзывы:

Похожие инструкции для FXH 20

Бренды по названию

Популярные бренды

Still FXH 20, Оригинальное руководство пользователя

Результаты поиска

Содержание FXH 20

Отзывы:

Похожие инструкции для FXH 20

Бренды по названию

Популярные бренды