Still FXH 20 Скачать руководство пользователя страница 74

Страница: 74 / 140

Use

Driving: Single-pedal option

– Put the truck into service.
Forward travel
– Push the drive switch down (1) to travel

forwards (in the opposite direction to the

load arms).

– Press the accelerator pedal (4).
Reverse travel
– Push the drive switch up (2) to travel

backwards (in the direction of the load

arms).

– Press the accelerator pedal (4).

WARNING

Restricted visibility
During reverse travel, visibility may be restricted.

Be very careful. Make sure that the path behind is

clear before travelling in reverse.

Reversing the direction of travel

– Keep the accelerator pedal (4) depressed.
– Push the drive switch down (1) or up (2).
– Push the drive switch (3) in the opposite

direction.

The truck brakes progressively and then

moves off in the opposite direction until the

required speed has been reached.

Drive direction indicator

On the display, the drive direction indicator

light (1) or (2) lights up to indicate the direction

of travel.

11548011751 EN - 10/2018

Содержание FXH 20













































































































































Результаты поиска

Содержание FXH 20

Отзывы:

Бренды по названию

Популярные бренды

Still FXH 20, Оригинальное руководство пользователя

Результаты поиска

Содержание FXH 20

Отзывы:

Бренды по названию

Популярные бренды