Still FXH 20 Скачать руководство пользователя

Страница: 64 / 140

Use

Driving

Braking on the version without

pedals

WARNING

The quality of the ﬂoor surface affects the braking

distance of the truck.
This should be taken into consideration when

driving.

NOTE

Braking is progressive and increases as the

brake pedal is depressed.

Braking using the brake pedal
– Push the joystick to move the truck for-

wards.

– Press the brake pedal (1).
The truck brakes progressively until the truck

comes to a complete stop.
The driving controls are available.
Braking by releasing the joystick

DANGER

Do not rely on lift-off braking to stop the truck in an

emergency.
Always use the brake pedal in an emergency and

press the emergency off switch if necessary.

– Push the joystick to move the truck for-

wards.

– Release the joystick.
The truck brakes progressively until the truck

comes to a complete stop.
The driving controls are available.
Braking by reversing the drive direction
– Push the joystick to move the truck for-

wards.

– Push the joystick in the opposite direction.
The truck brakes progressively and then

moves off in the opposite direction until the

desired speed has been reached.
The driving controls are available.

11548011751 EN - 10/2018

Содержание FXH 20













































































































































Результаты поиска

Содержание FXH 20

Отзывы:

Похожие инструкции для FXH 20

Бренды по названию

Популярные бренды

Still FXH 20, Оригинальное руководство пользователя

Результаты поиска

Содержание FXH 20

Отзывы:

Похожие инструкции для FXH 20

Бренды по названию

Популярные бренды