Stihl STIHL PC 70, Инструкция по эксплуатации

Страница: 46 / 72

PC 70, PC 75
English
44
Working Technique with Sickle
N
Hold the control handle with your
right hand, and the shaft with your
left hand. Your left arm should be
extended to the most comfortable
position.
Note the different working techniques for
cutting palm fronds and harvesting fruit
bunches.
Cutting palm fronds
N
Hook cutting edge of the sickle over
the palm frond.
N
Open the throttle and cut through
the palm frond with the sickle.
N
Keep throttle open as long as the
sickle is in the cut.
N
With the sickle in the cut, pull it
downwards in the direction of the
shaft and finish cutting the palm
frond – do not twist the sickle in the
cut.
N
Do not accelerate engine when the
sickle is not in the cut.
Harvesting fruit bunches
N
Expose the fruit bunch – cut away
the surrounding palm fronds.
N
Apply tip of sickle to fruit bunch.
N
Open the throttle and cut through
the fruit bunch with the tip of the
sickle.
N
Keep throttle open as long as the
sickle is in the cut.
N
Do not accelerate engine when the
sickle is not in the cut.
N
If necessary, use the sickle as a
hook to pull out the fruit bunch.
Other steps
N
Apply the sickle to the next palm
frond or fruit bunch.
N
Always cut close to the trunk.
N
Repeat the procedure for the next
palm frond or fruit bunch.
N
Always shut off the engine before
leaving the unit unattended.
0810BA003 KN
0810BA004 KN
0810BA005 KN