STEYR MOTORS Marine Engine 2012 Series, Руководство по обслуживанию

Страница: 44 / 274

General Preliminary Service Manual MARINE 2012
Z001138-1_2013-02-01 44/65
E Quality guidelines for repair
E 1 Spare part specification
Your
STEYR engine
was designed for specified operation which means operating
conditions such as:
* Long-time operation at high speed load and
* Operation in salt or brackish water
* Operation in very muddy water
Only use genuine STEYR spare parts in order to avoid possible loss of performance. For
this reason you should insist on the famous quality of genuine STEYR spare parts and
under no circumstances use spare parts of unknown quality.
E 2 Workshop Profile
Independently of the respective repair steps and the legal regulations the workshops have
to meet the following requirements:
- Clean, dry, and dust free environment
- Lifting gear (crane) with a lifting capacity of 5 000 N (500 kg) minimum
- Cleaning device (wash basin) for soiled components
- Commercial tools
- Appropriate test and measuring equipment
- Receptacles for operating agents.
Depending on the repair step to be carried out, the tools indicated in the STEYR MOTORS
TOOL catalogue have to be used.
Furthermore special care is to be taken in case of purchasing and stock of required
operating material, spare parts and wear parts (e.g. seals, filters, sealants ...).
For appointed retailers and authorized workshops of STEYR MOTORS GmbH, the
following minimum standard is to be met:
- basic training (as soon as possible, after conclusion of contract, for trade and workshop)
- biannual training (reoccurring)
- tool kit I (service and maintenance tools)
- tool kit II - III (depending on repair to be carried out a peripheral and internal work)
- procurement and stock of required genuine spare parts (proposed spare parts may be
handed out upon request)
- spare part catalogue for all STEYR ENGINES models
- technical literature
- PC diagnostics