Stewart Filmscreen – Luxus
8
PREPARING THE INSTALLATION (CONTINUED)
When installing your Luxus to the wall or ceiling using the sliding mount bracket, there are a couple things to
consider to make the installation a smooth and easy operation.
Mounts
Inside each Luxus box there are two 18 inch mounts to be used
in whichever configuration that is required. Each mount has a
total of six holes precut to ensure that at least two studs are
utilized for mounting (see Figure 3). The spacing between the
two edge holes is 16 inches.
Fasteners
The type of fasteners used for mounting
is critical. If incorrect fasteners are used,
the channels of the Luxus may not latch
onto the mount clips. Additionally, if
weak fasteners are used, the Luxus unit
may fall. Be sure to use a total of four
No. 10, 3 ½ inch deck screws on each
mount (see Figure 4).
Figure 3. Top of Luxus mount
Figure 4. No. 10, 3 ½ inch
screw
