Stewart Filmscreen – Luxus
11
ELECTRICAL
The Luxus screen system can be controlled through several remote control devices (IR and RF), keypads,
dry contact outputs, internet protocol (IP), and low-voltage trigger outputs.
Note:
This manual refers to AC (electrical alternating current) to represent electrical power. Your
location may use 120 V, 220 V, or other electrical power. Screen systems are manufactured using the
electrical power type specified for the location. Use appropriate power sources for your location.
MOTOR WIRING
The Luxus’ screen system’s motor is prewired at the factory. No additional motor wiring is required.
The following pages will outline standard and optional control types for Luxus.
Connections
The following Stewart Filmscreen accessories that plug into the smart port have RJ25 male
connections. These accessories are able to plug into the RJ45 female smart port with no issues.
IR receiver
IR wall switch
IBT-100
⚠
CAUTION
Luxus is to be installed and used within the scope of the appropriate electrical codes and
regulations. Failure to do so may cause malfunctioning or damage to the screen.
⚠
CAUTION
Luxus has two female RJ45 inputs on rear of case. Neither port is to be used with POE
(power over Ethernet). Improper use of ports will cause irreversible damage to IMC
control board and may void your warranty.
