Stewart Filmscreen – Luxus
26
BONNET REMOVAL
Luxus now offers a two-piece construction that allows the bonnet (front fascia) to come off for servicing.
This allows easy access to the control system and roller tube assembly without having to take the entire
unit down. To remove the bonnet:
1.
Remove the four hex head 10-32 screws from each
end cap, left and right (see Figure 25).
2.
Remove both end caps as you undo
the last screw from each side (see
Figure 26).
3.
Slide the bonnet off. Carefully place in a
safe location (see Figure 27).
Installation is the reverse of the uninstalling instructions.
Figure 25. Audience left, front of
unit, showing screws removed
Figure 26. Audience left, front of
unit showing endcap removed
Figure 27. Audience left, front of
unit, showing bonnet removed
