9
GENERAL ASSEMBLY INSTRUCTIONS:
Thank you, for purchasing this
Stevens Aeromodel
SQuiRT 700 – A speed 700 primary trainer. This kit provides the
builder and pilot a refreshing change of pace from heavy “ARF” style plywood box airframe construction and blends stick
and tissue design methods of the past with state of the art CAD technology and precision interlocking laser cut parts; the
result is something you will find truly exceptional to build and fly. This kit is intended for a beginner-novice builder and
beginner pilot as a primary 3-channel trainer.
Best Regards,
Bill Stevens
[email protected]
Stevens AeroModel
“Laser Engineered Kits™”
4550 Beaumont Rd.
Colorado Springs, CO 80916
Assembly Tips
•
READ THE INSTRUCTIONS
and the plan sheet prior to starting any work!
•
Tape plans to work table. Cover with wax paper or plastic wrap.
•
Join all joints with Thin CA unless otherwise specified.
•
DO NOT REMOVE THE PARTS FROM THE BALSA SHEETS UNTIL REQUIRED!
•
DO NOT FORCE THE FIT
– when in doubt double check your parts - removal of material should not be
required. If you feel that you have a poor connection check first to see that the part is not upside down.
Reference each piece against the plan sheet.
•
Making solid glue joints: Hold parts together on top of plan sheet using moderate pressure to fit parts - wick thin
CA into joint. (There is no need to pin parts to work table as all pieces interlock and self - jig.)
© 2005 Stevens AeroModel all rights reserved.