Stevens AeroModel SkyBoy 600, Руководство пользователя

Страница: 39 / 55

Wing Cont.
☐ ☐ Cut upper cap strip from 1/4 in. square x
5-11/16 long balsa stock. Tack glue at
ribs only.
☐ ☐
Tack glue sub-rib R3a to spar.
☐ ☐ Fit turbulator spar T2 to ribs R3, R3a, and
R4. Ensure arrow on T2 points toward rib
R3. Tack glue.
☐ ☐ Cut remaining turbulator spars to length
from 3/16 in. square balsa stock. Spars
should end flush with outer face of rib R4.
☐ ☐
Cut leading edge from 3/8 in. square
balsa stock, 8 in. long. Sand one end of
stock to fit center section leading edge at
rib R3. Tack with thin CA.
☐ ☐ Fit ply servo pocket part W6b to slots in
Rib R3 and sub-spar W5. Bond with
medium CA.
SkyBoy 600 © 2010 Stevens AeroModel all rights reserved. Page 39 of 55
Main Spar
Upper Cap Strip
R3a
R3
R4
R3a
T2
R4
8 in.
R3
W6b
W5
R3
Bottom View