Stevens AeroModel SkyBoy 600, Руководство пользователя

Страница: 35 / 55

Wing Cont.
☐ ☐ Fit W4 into the corner of R1 and main
spar, between upper and lower spar caps.
Tack glue with medium CA.
☐ ☐
Fit and tack glue sub-rib R2a to main
spar.
☐ Repeat ☐ ☐ steps on page 34 and above for
opposite side diagonal brace.
☐ Assemble turbulator spar T1 from parts T1a
and T1b. Bond with medium CA.
☐ Fit and tack glue turbulator spar to front
notches in the ribs.
☐ Cut remaining spars from 36 in. lengths of
3/16 in. square balsa stock. Trim so that spar
ends align with the center of ribs R3 when
spar is centered.
☐
Install spars to middle and aft notches of the
ribs. Square wing on a flat surface and bond
all spars to each rib with medium CA.
SkyBoy 600 © 2010 Stevens AeroModel all rights reserved. Page 35 of 55
W4
R1
Spar Caps
R2a
T1a
T1b
Front Notch
Center of
Rib R3
Install