Fuselage Cont.
☐
Double check that assembly is square and
flat, then permanently bond sheeting.
☐
Check it out!
Your fuselage is almost
complete!
☐
Pushrod Housing:
NOTE - the following
steps will be done with the fuselage inverted.
Insert an 18 in. length of yellow pushrod
housing through the rear-most slot on the
RIGHT side of the fuselage.
☐
Pass pushrod housing through the furthest
LEFT hole in F9...
☐
...through left hole in F6...
☐
...and finally 1/8 in. through left hole in F5.
Bond housing at each former and at the exit
point in the fuselage side with a drop of
medium CA.
SkyBoy 600 © 2010 Stevens AeroModel all rights reserved.
Page 31 of 55
Bottom View
Bottom View
Bottom View
Bottom View
F9
F6
F5
1/8 in.
Right Side
Left
Left
Left
Содержание SkyBoy 600
