Stevens AeroModel SkyBoy 600, Руководство пользователя

Страница: 21 / 55

Fuselage Cont.
☐ Bond blind-nuts with thin CA at each nut
flange.
☐
Fit motor mount F7 to fuselage side. Ensure
that flanges of blind nuts face the rear of
the fuselage. Tack glue in place.
☐
Prep for Left Side: Trim previously installed
longeron flush with the back of F6.
☐ Fit and tack glue F8 to right fuselage side,
trapping longeron.
☐ Left Fuselage Doubler: With etching facing
up, fit and bond together parts FDa,b,c (Left).
☐
On a smooth, flat surface, fit FDd (Left) to
previous assembly. Ensure that etching on all
parts face up.
SkyBoy 600 © 2010 Stevens AeroModel all rights reserved. Page 21 of 55
F7
FDd
F6
FDc FDb FDa
Left Side
Bond
Trim
Do Not Cut Through
Fuselage Side!!
F8
(LEFT)
FDa,b,c