Stevens AeroModel SkyBoy 600, Руководство пользователя

Страница: 20 / 55

Fuselage Cont.
☐ ☐ Ensure that numbers on the ends of the
diagonals match the numbers on the
slots. Bond with thin CA.
☐ Test fit completed fuselage side to crutch/
doubler assembly. Ensure, and familiarize
yourself with, the fit of all parts.
☐ Remove fuselage side and coat doubler with
thick CA then...
...immediately re-fit fuselage side pressing
doubler/side together on a flat surface.
☐ Hold assembly on a flat surface and bond all
mating surfaces with medium CA.
☐ Motor Mount: With the etched (back) side
facing up, drive the four blind-nuts in the
circled holes of F7 with a hammer.
SkyBoy 600 © 2010 Stevens AeroModel all rights reserved. Page 20 of 55
3
3 3
BACK F7
F2