12
13
fAUcET InSTALLATIOn
fAUcET InSTALLATIOn
3
Assemble the permanent
panel by screwing the pro-
vided four screws.
STEP 3– cOnnEcTInG ThE wATER SUPPLy
1
Turn on the central water
supply and check for leaks.
NOTE: Tubular includes a special aerator that allows you to
adjust the water stream direction on site in order to prevent
water splashing if needed. To change the angle of the water
stream, simply move the adjustable tilting plate by pressing it
smoothly.
If the automatically adjusted sensor range is not satisfactory to your purposes, please
refer to the section entitled “Settings adjustment”.
STEP 2– cOnnEcTInG ThE POwER SOURcE
IMPORTANT: This product includes a self adjusting sensor. The ideal sensor range for
the specific location will be set automatically.
OBJECT
Before proceeding, check that no
objects are in front of the sensor
besides the washbasin.
Now, remove the protective sticker
that covers the sensor.
1a
If your model is Tubular 1000 B
Box, the battery box is attached to
the panel. Connect the battery box
connector to the electronic unit
connector.
FROM THE ELECTRONIC UNIT
TO THE POWER SUPPLY
1b
If your model is Tubular 1000 E
Box: Thread the transformer wire to
the box.
Connect the power supply
connector from the electronic unit
coming from the corrugated tube
to the transformer, and plug the
transformer into the electricity
socket.
2
After you have connected
the power source (battery or
transformer) wait about 10
seconds in order to allow the
system to set the ideal sensor
range. Then the product will be
ready for use.
10
SECONDS
ABOUT
TUBULAR
1000
B BOX /
1000
e BOX
TUBULAR
1000
B BOX /
1000
e BOX
