Page 13
16400-7802 GBY REV G
4 - PREPARE THE FIREPLACE
B. NAILING TABS
The nailing tabs will ensure the
1" minimum clearance is kept to
combustible framing. Refer to Figure 4B.5
Depending on your installation and how you
frame it out, you may not use the provided
nailing tabs.
Figure 4B.4
Figure 4B.5
1"
STEP 1: Refer to Figure 4B.1
The four (4) nailing tabs will be shipped in a
flat state placed on the firebox back.
Locate the nailing tabs and remove the
screws holding them in place.
STEP 2: Refer to Figure 4B.2
Bend the two (2) small tabs out on each
nailing flange at the perforated lines.
Using Figure 4A.4 for reference, locate the
pre-drilled holes on the firebox side each
nailing tab will be placed at.
STEP 3: Refer to Figure 4B.3 & Figure 4B.4
Set each nailing tab in place and secure
using two (2) screws each. Bend the
nailing tab out from fireplace at the
remaining perforated line.
Figure 4B.2
Figure 4B.1
Figure 4B.1
Figure 4B.3
Figure 4B.3
Содержание 3BY-24GL
Страница 2: ...INS_CUST UL REV E Page 2...
Страница 35: ...Page 35 16400 7802 GBY REV G...
Страница 51: ...Page 51 16400 7802 GBY REV G...
Страница 52: ...INS_CUST UL REV E Page 52...
