Page 11
16400-7802 GBY REV G
3 - SPECIFICATIONS
F. CLEARANCES
From unit left & right sides
1"
25mm
To flooring under fireplace
0
0
Unit top to ceiling
6"
152mm
Unit side to adjacent sidewall
1"
25mm
CLEARANCES SHOWN ARE MINIMUM TO COMBUSTIBLES
NON-COMBUSTIBLE FRAMING AND FINISHING MATERIALS ALLOWED RIGHT UP TO THE FIREPLACE.
6” [152] Top Standoffs; shipped flat.
Refer to Section 3 (Prepare The Fireplace)
for assembly instructions.
6” [152]
Top Standoffs
Minimum distance recommended
from front of appliance for service access.
1/2” [13]
24” [610]
6”
[152]
NO COMBUSTIBLE
FRAMING MATERIALS
WITHIN 1” [25] OF THE BACK
OF THE FIREPLACE.
This does not include finishing
materials or perpendicular wall
intended to cover the face/trim.
Can be a recess and/or
combustible perpendicular wall
extending past the face of the
fireplace. Refer to
Section 2
(Left Corner Dimensions)
for more measurements.
1/2” [13]
1/2” [13]
Standoff
1” [25]
1”
[25]
1/2” [13]
1/2” [13]
X3 1/2” [13] Hood Standoffs on each side.
Refer to Section 5 (Non-Combustible Zone)
for more information.
1”
[25]
OTHER CLEARANCE NOTES:
No combustible material within 6” [152] of the top of the fireplace.
No combustible material within 1 [25] around the B-Vent flue.
Combustible finishing materials may cover the 3” [76] top and bottom black trim. Do not overlap glass.
Combustible framing allowed right up to the fireplace below the viewing area only.
A combustible mantel may be placed at the top of the viewing area. Do not overlap glass.
A combustible hearth extension may be used below the viewing area. Do not overlap glass.
Do not place on carpet, vinyl or soft surfaces.
The hood must be supported at specific locations
using 1/4-20 UNC threaded rods.
Refer to Section 3 (Threaded Rods)
for requirements.
Top Black Trim
Bottom
Black Trim
Figure 3F
Содержание 3BY-24GL
Страница 2: ...INS_CUST UL REV E Page 2...
Страница 35: ...Page 35 16400 7802 GBY REV G...
Страница 51: ...Page 51 16400 7802 GBY REV G...
Страница 52: ...INS_CUST UL REV E Page 52...
