Stellar Effects Modeling Solutions REFIT SIGNATURE Series, Руководство пользователя

Страница: 37 / 43

37
STARTUP MODE
Once the startup mode is engaged, the ship will begin powering up all of the
lights and functions through the startup sequence designed and timed to emulate the
on-screen version from the movie mode selected. Each startup sequence is several
minutes long and MUST BE COMPLETED before any remote button functions can be
used. Here is a list of some of the features of each startup mode to look for:
TMP MODE
–
The start sequence for this mode is designed to time in sync with the
scene from the first film. Note that, upon initiating the startup, the shuttle bay lighting
automatically shuts off in preparation for “launch.” (It may be turned back on after the
startup sequence has completed except in warp mode) All exterior lighting will come on
in the exact sequence with the original film scene. The thrusters initialize at ¼ power
until the captain gives the order to engage the thrusters and move forward, at which
time, the thrusters will increase to full. At the appropriate time, when the engineer gives
the green light for impulse power, the impulse engines will engage to “warp .5” power.
(or, ½ impulse power) After the completion of the startup sequence, the ship will accept
commands from the remote control. It will be set with a copper deflector with thrusters
set to full and impulse engines set to ½ power.
TWOK MODE
–
The start sequence for this mode is designed to time in sync with the
scene from the second film. Note that, upon initiating the startup, the shuttle bay
lighting automatically shuts off in preparation for “launch.” (It may be turned back on
after the startup sequence has completed except in warp mode) All exterior lighting will
come on in the exact sequence with the original film scene. The thrusters initialize at ¼
power until the captain gives the order to engage the thrusters and move forward, at
which time, the thrusters will increase to full and the impulse engines will engage to ¼
impulse power. until the helmsman is allowed to “indulge,” when the impulse engines
will increase to full power. After the completion of the startup sequence, the ship will
accept commands from the remote control. It will be set with a copper deflector with
thrusters set to full and impulse engines set to full power.
TSFS MODE
–
The start sequence for this mode is custom designed to sync with the
startup scene from the third film, yet show some effects not shown in the movie. The
deflector comes on blue, as shown in spacedock in the film, and the bridge flood light
comes on to simulate the only other light coming on in the beginning of the scene in the
film. Also, the interiors are all on at a lower setting to emulate the idea that the ship is
vacant and automated except the bridge crew. (it can be adjusted during the prestart or
after startup is complete) The exterior lighting comes on when the captain gives the
order to engage auto systems and the impulse power comes on at ¼ power upon
command. Impulse power then increases to full upon command from the captain. Warp
then engages at the captain’s order to escape the pursuing Excelsior. A few moments
afterward, the ship will automatically drop out of warp and enter impulse mode, at
which time the ship will be ready to accept commands from the remote and will be set
with a blue deflector with thrusters set to full and impulse engines set to ½ power.