Stellar Effects Modeling Solutions REFIT SIGNATURE Series, Руководство пользователя

Страница: 36 / 43

36
STELLAR EFFECTS REFIT
SIGNATURE SERIES
OPERATIONS AND REMOTE CONTROL FUNCTIONS
POWER UP AND MODE SELECTION
When you power up your SFX REFIT SIGNATURE SERIES effects board, you will
hear the introductory music and a prompt from the computer to choose your desired
movie mode. To choose which mode the model will function in, select from the three
buttons at the top left of the remote control. You may choose from any of the first three
films in the franchise that feature the original version of the 1701 Enterprise Refit. (No
other buttons will operate at this point) Each mode will feature a unique start-up
sequence timed and designed to emulate the ship startup scenes seen in the chosen
film. All of the music and story functions will also be from the film of the selected mode
as will some of the individual effects. You may cycle through the modes.
Once you’ve selected the movie mode you wish to have the model emulate, you
must initiate the model by pressing the
“
H
“
button at the top right.
This will “lock in” the chosen mode and engage the pre-start mode. The interior
and shuttle bay (if installed) lights will come on and intro music from the selected film
will play, letting you know the ship is ready for the startup mode to be engaged. At this
point, you can adjust the brightness of the interior lighting, turn off/on the shuttle bay
lighting, (if installed) and adjust the volume as desired. All other functions are
inoperable until the ship has fully completed the startup feature.
NOTE: Once the movie mode is locked in, the only way to change it is to either
turn off the main power from to the model and turn it back on again or to go through
the startup sequence (see next steps) then power down the ship (see “SHUTDOWN”
instructions) and reselect the desired mode from the power up mode.
To begin the startup mode, press the
“
H
“
button again.