Stellar Effects Modeling Solutions REFIT SIGNATURE Series, Руководство пользователя

Страница: 11 / 43

11
*A NOTE ON PYLON PINS*
While not a specific lighting issue, it should be noted that the model kit has a
challenging fit issue where the pylons mount to the secondary hull. The pylon pins do
not go into the holes correctly, which causes the pylons not to seat where they’re
supposed to causing fit issues and gaps. This can be corrected by altering the pylon pins
slightly. Refer to YouTube videos for more information or contact us and check the
website blog at
www.stellareffects.com for specific instructions.
DEFLECTOR HOUSING/RCS THRUSTERS
The deflector housing incorporates a bi-color LED for the main forward deflector.
This lighting kit is designed for a specialized NEOPIXEL LED depending on what’s
included. If using a 5mm LED, you will need to increase the hole size in the center of the
deflector housing to accommodate a 5mm LED. (Use previous chart for non-metric
conversion bit size)
Additionally, you will need to drill 4 holes in the RCS thruster areas to allow light
from the LED’s to shine through. Use a 2mm or 3/32” drill bit to give you the proper size
to install the RCS thrusters.
There are 4 of these areas around the deflector housing. Each must be drilled.