Steelwrist Tiltrotator Front pin lock X04, Руководство пользователя

Страница: 61 / 64

9.7. Check list - Delivery of the machine
To ensure correct installation, your installer received an installation guide. Experience shows that not all workshops
are equally meticulous in following the installation instructions and of course even the best fitter may make a mistake
if unlucky. We therefore suggest that you check the following items when you receive your machine.
1. Make sure feeder hoses are long enough, that is, so you can run the bucket cylinder from fully closed to fully
extended, without stretching the hoses.
2. Check that the tiltrotator cable is well attached of a hose and not pinched when you tilt the tiltrotator maximum.
3. Check that the tilt cylinder hoses and the hydraulic block so that they are not pinched when you tilt tiltrotator
maximum.
4. Check the functionality of all functions.
9.8. Check list - Weekly inspection and lubrication
1. Make sure the lock function, and machine quick coupler locks properly
2. Visually check that all front pin lock parts are intact.
3. Check that the indicator bars are intact.
4. Check that hoses and connections are intact without oil leaks
5. Check that the locking of the tilt axes are intact and undamaged
6. Check that the locking of the tilt cylinder axes are intact and undamaged
7. Check that the locking bolt for lock cylinder is intact and tight.
8. Make sure the mounting screws for tilt cylinder brackets, worm flange, top cover and gripper cassette are intact
and tight
9. Make sure the cable harness is intact and undamaged
10. Check radial and axial play
11. Check all shaft bearings for wear and tear. Excessive wear can cause costly consequential damages
12. Check that warning labels are present and readable.
13. Lubricate the tilt cylinder brackets grease nipples (2-4 pcs. depending on model)
14. Lubricate the tilt shafts grease nipples (2x)
15. Lubricate the tilt cylinder shafts grease nipples (2pcs)
16. Lubricate all grease nipples on the gripper cassette (6 pcs)
17. Lubricate all grease nipples on the gear box (4 pcs)
9.9. Check list - Daily inspection and lubrication
1. Make sure the lock function, and machine quick coupler locks properly
2. Visually check that all front pin lock parts are intact.
3. Check that hoses and connections are intact without oil leaks
4. Check that the locking of the tilt axes are intact and undamaged
5. Check that the locking of the tilt cylinder axes are intact and undamaged
6. Check that the locking bolt for lock cylinder is intact and tight.
7. Make sure the mounting screws for tilt cylinder brackets, worm flange, top cover and gripper cassette are intact
and tight
8. Lubricate the tilt cylinder brackets grease nipples (2-4 pcs. depending on model)
9. Lubricate the tilt shafts grease nipples (2x)
10. Lubricate the tilt cylinder shafts grease nipples (2pcs)
11. Lubricate all grease nipples on the gripper cassette (6 pcs)
User Manual tiltrotator with Front pin lock
™
| 9. Maintenance | 61