Steelwrist Tiltrotator Front pin lock X04, Руководство пользователя

Страница: 32 / 64

5.1. Operating the lock function
The tiltrotator has an integrated attachment coupler where the lock is operated with an safety switch mounted in
the cab. The attachment coupler is opened and closed as follows. For coupling of a work tool:
Connecting work
tools
Warning: If the quick coupler safety switch is activated without the buzzer sounding or without the warning
in the display showing, discontinue the operation and troubleshoot.
Warning: Remember that the hydraulic system must be pressurized in order to make the attachment
coupler lock.
Warning: The lock may open immediately after the quick coupler switch is activated depending on residual
pressure in the hydraulic hoses. Make sure work tools are always placed in a secure position before the
quick coupler safety switch is activated.
1. Open the quick coupler by pulling down the safety lock and then pressing down the safety switch. A warning
signal or buzzer sounds which indicates that the lock is no longer in a secured position. A warning symbol
appears on the display if a display is installed.
2. Build up hydraulic pressure by operating any of the features in the tiltrotator via the joystick. The tiltrotators
attachment coupler is opened.
3. When the safety switch is pushed back to "locked" the locking valve will lose power and the locking cylinder will
start to close.
4. Ensure that the lock is closed by building up pressure in the tiltrotator by operating the appropriate function in
the handle. The attachment coupler will now close.
5.2. Operation of the tilt function
Caution: The description below refers to standard settings and can sometimes vary depending on the
driver settings.
The tiltrotators tilt function is controlled by activating the right thumb roller on the joystick. Maximum speed should
be about 4 seconds from side to side. The higher the activation of the roller the faster the tiltrotator will tilt.
When you pull the roller to the left, the tiltrotator will tilt so that the left side of the work tool lowers, seen from the
driver's seat.
32 | User Manual tiltrotator with Front pin lock
™
| 5. Operation