9
X
A
fig.1
fig.2
fig.3
fig.4
HANG THE OPENER
100 mm
1
A
The door bracket must be securely fastened to the frame or
a structural support on the door.
Mounting position for Sectional Doors
1.For doors fitted with a strut, mount the bracket just above
the strut
.
2.For doors without a strut align the bracket on the centre line,
measure down 100 mm from the door top edge
.
3.Secure the bracket with hex head fixing 6 mm x 18 mm
screws in this position on a structural support of the door,
using the most suitable variation of holes available.
FASTEN DOOR BRACKET
15
16
The opener must be securely fastened to a sound
structural support above the opener.
1.Postion the opener as in the previous step. Check the rail
is centred over the door.
Ensure the rail brackets (fig.1) is on the Powerhead end of
the rail in a position as close to the opener as possible (X).
2.If mounting directly onto the ceiling, (fig.2) screw the
bracket directly into a structural support on the ceiling.
3.If hanging the opener below the ceiling, (fig.3) bend the
hanging brackets provided, and secure to both the ceiling
and the rail bracket.
4.If installing a segmented rail, a centre rail bracket is
supplied for installation in the mid position of the rail.
Simply slip both halves over the top of the rail (fig.4), and
secure to the ceiling, either directly or with hanging strips.
5.Check the opener is securely centred over the door.
Remove the 50 mm spacer, and any other assembly
tools. Operate the door manually and check for
unrestricted operation.
