Steel City 40260H, Руководство пользователя

Страница: 27 / 43

TRIAL RUN
Once all the assembly is complete and the
adjustments are complete, it's time for a test run.
1. Turn on the power supply
2. Press the start button. Keep your hand near the
switch, ready to shut the machine down quickly in
case anything does not sound right or if there
appears to be a problem.
3. The planer should run smoothly with little to no
vibration or rubbing noises. If any strange noise is
noticed, shut down machine and recheck all
adjustments.
Do not attempt to make adjustments while the
machine is running. Make certain the machine is
disconnected from the power source and the
machine has come to a complete stop.
wear eye protection. Any machine can
throw debris into the eyes during operations which
could cause severe and permanent eye damage,
Everyday eyeglasses are
safety glasses.
wear Safety Goggles(that comply with
ANSI standard Z87.1)when operating power tools.
ALWAYS
NOT
ALWAYS
HANDLE WHEEL
Turning the handwheel clockwise will raise the main
table while turning it counterclockwise will lower the
table. Crank the handwheel to raise or lower the
table according to the desired workpiece thickness.
SEE FIG 27.
Fig. 27
WARNING
!
WARNING
!
27