Steel City 40260H, Руководство пользователя

Страница: 14 / 43

!
WARNING
• The machine is heavy; a forklift or overhead lift
are required to lift the machine.
• Use a safety strap to avoid tip over when lifting
machine.
Check shipping carton and machine for damage before
unpackaging. Carefully remove packaging
materials,parts and machine from shipping
carton.Always check for and remove protective
shipping materials around motors and moving
parts.Lay out all parts on a clean work surface.
Remove any protective materials and coatings from all
of the parts and the planer. The protective coatings can
be removed by spraying WD-40 on them and wiping it
off with a soft cloth. This may need redone several
times before all of the protective coatings are removed
completely.
After cleaning, apply a good quality paste wax to any
unpainted surfaces. Make sure to buff out the wax
before assembly.
Compare the items to inventory figures; verify that all
items are accounted for before discarding the shipping
box.
If any parts are missing, do not attempt to plug in the
power cord and turn “ON” the machine. The machine
should only be turned “ON” after all the parts have
been obtained and installed correctly. For missing
parts, contact Steel City at 1-877-SC4-TOOL.
A) Dust Chute
B) Extension Wings
UNPACKING & INVENTORY
!
WARNING
14
A
B