Steel City 40260H, Руководство пользователя

Страница: 12 / 43

14. use the planer as a toy. use near
or around children.
15. that the machine sits firmly on the floor
before using. If the machine wobbles or is unstable,
correct the problem by using shims or blocks prior to
operation.
16. This machine is designed to process .
17. position fingers or thumbs near the infeed
roller.
18. Long pieces of stock should be supported
with some type of fixture.
19. operate planer with dull or damaged
blades.
20. that the planer is properly adjusted
DO NOT DO NOT
ENSURE
WOOD ONLY
NEVER
ALWAYS
DO NOT
MAKE CERTAIN
21. try and remove excessive amounts of wood
in one single pass.
22. all stock before planing, ensuring that
there are no foreign objects embedded in the wood,
loose knots, or knots that may become loose during
operation.
23. attempt to remove jams until power is
disconnected and all moving parts have come to a
complete stop.
24. that there is adequate operating space
on both the infeed and outfeed sides of the planer
before operating.
25. attempt to plane wood that is less than 7
long or less than 1/8-inch thick.
DO NOT
INSPECT
DO NOT
MAKE SURE
DO NOT
"
WARNING
!
WARNING
!
ELECTRICAL REQUIREMENTS
TO PREVENT
TO REDUCE DO NOT
DO NOT
electrical shock, follow all electrical and
safety codes, including the National Electrical Code
(NEC) and the Occupational Safety and Health
Regulations (OSHA). All electrical connections and
wiring should be made by qualified personnel only.
the risk of electrical shock, use
machine outdoors. expose to rain. Store
indoors in a dry area.
Fig. A
WARNING
!
DO NOT
DO NOT
connect the machine to the power source
before you have completed the set up process.
connect the machine to the power source until instructed
to do so.
The switch provided with your planer is designed for
240V single phase use only.
1. The switch has a power cord without plug attached.
There are many different configuration for 240V
outlets. A UL/CSA approved plug that matches the
configuration of your 240V outlet must be installed
before you can operate this tool.
2. The switch junction box is attached behind of switch
mounting plate. Loosen 2 of the fastening screws
and remove the cover. Then connect the related wire
lead of power cord as picture shows.
SEE FIG A.
12
BLACK
WHITE
GROUNDING
MOTOR
GREEN
240V
POWER
CORD
SWITCH BOX