Steca TR A502 TT, Инструкция по установке и эксплуатации

Страница: 26 / 56

26
742.114 | 14.50
EN
9.2 Calling up the settings menu and selecting a menu entry
√
Automatic
or
Off
mode is selected.
1. Press and hold
SET
for two seconds. The settings menu is displayed, menu entry
flashes.
2. Press

to select a different menu entry.
3. Change the settings as described in the following sections.
9.3 Setting the time
Note
The time must be once more set to the correct values if power is removed for a longer
period of time. After this, the same operating mode is displayed as was active previous
to the removal of power.
√ flashes.
1. Press
SET
. The hours display flashes.
2. Press  to change the hour.
3. Press
SET
. The minutes flash.
4. Press

to change the minute.
5. Press
SET
. The change is adopted.
9.4 Setting the system
Note
A system overview is provided in Section 4.4, p. 10.
√
S
yst
flashes.
1. Press
SET.
The number of the current system flashes.
2. Press  to select another system.
3. Press
SET
. The change is adopted.
9.5 Setting the functions
√
F
unc
flashes.
X
Continue as described in Section 10, p. 28.
9.6 Setting the parameters
Note
Details on the parameters are provided in Section 11, p. 45.
√
P
ara
flashes.
1. Press
SET
.
P:01
(parameter number) flashes.
2. Press  to display a different parameter.
3. Press
SET
. The value of the parameter is displayed, associated components flash in
the system graphics.
4. Press
SET
. The parameter value flashes.
5. Press

to change the value.
6. Press
SET
to adopt the change.
7. Press
ESC
. The parameter number is displayed (flashing).
8. If necessary, repeat steps 2 – 7.