Steca TR A502 TT, Инструкция по установке и эксплуатации

Страница: 19 / 56

19
742.114 | 14.50
EN
6.2.4 Pictograms for functions
The following table describes the pictograms used for functions (

in Fig. 8).
Symbol Description Symbol Description
Manual operation
Holiday – recooling 2)
Pump is speed controlled 1) Alarm output 1)
Interval 2) Stagnation reduction 2)
Freeze recirculation 2)
1) Symbol is visible while the function/parameter is being edited in the settings menu.
2)
Symbol flashes: The function is activated and is actively intervening in the control process.
Symbol does not flash: The function is activated and is not actively intervening in the control
process or the function is currently being edited in the setting menu.
6.2.5 Operational and setting values
The display of the operational and setting values (

in Fig. 8) consists of the following
elements:
B
l
g
p
1 2
3 5 6 4

Symbol for time control of functions. This symbol is displayed when:
• a time restriction / control has been set,
• the status of time restriction/control is displayed,
• the time restriction blocks a temperature control (symbol flashes).

Number of the time window that is currently being set/displayed or within which
the current time lies.
The time control of a function consists of 1 to 3 configurable time windows. Example:
Time window 1: 06:00 – 08:00
Time window 2: 11:00 – 12:30
Time window 3: 17:00 – 19:00

Additional information:
on
,
off
: switching state/condition on , off
max
,
min
: maximum value, minimum value
Σ: summed operational value since first commissioning, cannot be reset
Δ:
summed operational value since last reset to 0

Symbol is displayed when a temperature sensor is selected when setting a function.

Display of:
• Measurements
• Settings
• Error codes
• Additional information, e.g. software version

Physical unit of the value displayed in

: °F, F, psi, gal/min, MBtu, MBtu/h, MMBtu,
%, tn sh CO
2
Note
The physical units are only displayed as appropriate.