Steca TR A502 TT, Инструкция по установке и эксплуатации

Страница: 15 / 56

15
742.114 | 14.50
EN
Set pump 2 (output R2; only if a system with 2 pumps was selected in step 7; otherwise
continue with step 20)
18. Press  .
AC
and (pump 2) flash (example in fig.
left).
19. Perform steps 10 to 17 accordingly for pump 2.
20. Press  .
F:
is displayed.
Set the functions (necessary for System 0.1, or as required for other systems; The func-
tions can also be set at a later date.)
21. Press
SET
to set the functions.
F:01
(function num-
ber) flashes (example in Fig. left).
or
Press

to skip the setting of the functions;
Ok
flashes. Continue with step 30.
22. Press

to select a different function. (Function
description in Section 10.3)
23. Press
SET
.
oFF
is displayed.
24. Press
SET
.
oFF
flashes.
25. Press  .
on
flashes.
26. Press
SET
. The function is activated.
27. Set the characteristics (see Section 10.1).
28. Press
ESC
.
29. Press

.
Ok
flashes.
Finishing initial commissioning
30. Press
SET
to finish initial commissioning. The
controller switches to the operating mode
Off
(Example in Fig. left).
or
Press

/
ESC
to display the previous settings and
correct them if necessary.
Set the operating mode (off, manual, automatic)
31. Remove the front panel (Fig. left and Section 4.1.1).