EN
4
1 General information
The solar charge controller is available in two power levels (30 A and 50 A).
The device fulfils the following tasks:
•
Optimizing the power yield of the connected solar modules
•
Controlling the charging process of the battery
•
Monitoring the charge state of the battery
•
Connecting and disconnecting the consumers connected to the load output
Characteristics
•
Intelligent Maximum Power Point Tracking
•
Automatic battery voltage detection
•
Three-stage charging process to optimize battery performance
•
Maximum efficiency up to 99 %
•
Charging current configurable depending on the application
•
Support of various battery types
•
Backlight
•
Data output via serial interface (RS-232)
The state-of-the-art device is equipped with an optimized "Maximum Power Point Tracking
(MPPT)" algorithm and is, thus, able to utilise the maximum available power of the solar
module at any point in time and in a wide range of environmental conditions.
The type plate with the required data related to the device and the manufacturer is at-
tached on the bottom of the right side.
The declaration of conformity is available on the website of the manufacturer.
Scope of delivery
•
1 ea. solar charge controller
•
1 ea. installation and operating instructions
Prior to the installation, check whether the packaging and the device are intact.
