EN
10
Mounting location:
•
Mount only indoors.
•
Mount in vertical position on the wall, on concrete or another non-flammable surface.
Mounting materials such as screws and dowels depend on the mounting surface and
are, therefore, not included in the scope of delivery.
•
Observe the free space specified below to ensure ventilation of the device.
•
Observe the ambient temperature and air humidity specified in the technical data (refer
to chapter 10).
•
To allow a clear view of the display, mount the device at about eye level.
•
Select mounting location such that the lengths of the cables to the solar module, the
battery, and the consumer are kept as short as possible.
Mounting location with free space for ventilation
1. Place the device in mounting position.
2. Mark the position of the mounting bores through the four fixing holes on the device
frame.
3. Drill the four mounting bores in the mounting surface (
Ø
5 mm).
4. Fix the device with fixing materials suitable for the type of mounting surface.
