background image

Do not allow anyone to store any of the above-mentioned hazardous items, or similar items in rooms where the System-
Manager is installed! 

The pre-set signs and marks must not be changed, removed, or made illegible. 

All operations must be conducted in accordance with your national electricity regulations and local rules! 

For installation in your country, please see your corresponding institutions for information on regulations and safety 
measures. 

Keep children away from any and all electronics!  Fatal accidents can occur! 

1.4  Waiver Of Liability 

The manufacturer (STECA and its assigned representatives) cannot check that this manual is strictly followed, nor the 
conditions and methods for installation, operation, use and maintenance of the System-Manager. 

Improper installation can lead to physical damage to the System-Manager and its safety features, and thus can endanger 
persons. 

Therefore, we the manufacturer do not take any liability and responsibility for losses, damages and costs which are due 
to an improper installation, operation, use and maintenance or any other consequences resulting from such damage. 

Furthermore, we do not take any liability for infringements of patent rights, or rights of third persons, which result from the 
use of this System-Manager.  

The manufacturer reserves the right to make alterations, without prior notice, to the product itself, technical data or the 
installation and instruction manual. 

If other components, which are not prescribed by manufacturer are connected to this System-Manager, the user has to 
accept the consequences. 

CAUTION: Opening the System-Manager (connecting cover excluded) as well as use other than 
prescribed by the manufacturer, will cause the warranty to be voided. 

2  Range of Applications 

The System-Manager is designed for a wide range of applications from private use to professional use: private homes or 
leisure market (like recreational vehicles or weekend/seasonal cottages, etc.) or in locations where trade, business or 
commerce is done (like workshops, stores, offices etc.) or industrial applications or telecom systems. 

The System-Manager can NOT be used outdoors, where it would not be protected against rain or sun.  

Unless external temperature sensor the System-Manager must be installed in the same room as the battery due to the 
following reasons: 

  an integrated temperature sensor registers the ambient temperature of the room, which is almost identical to 

the battery temperature. 

  In order to keep the voltage drop between System-Manager and battery to a minimum, please only use the 

shortest possible battery cables. 

The System-Manager’s PV input  should only be connected to solar modules. However, the battery can also be charged 
in parallel by other sources with appropriate battery charge functions.  

Hint:  The System-Manager is able to adapt to customised applications. We will optimise your product concerning your 

special requirements. With these modifications the System-Manager will withstand strong ambient conditions like 
advanced temperature range, mechanical and climatic ambient conditions or advanced interference resistance.  

System-Manager  TAROM | 716148 

page 4 

V09_45A 

Содержание Solarix 2401






















Отзывы: