Steca PA Link1, Инструкция по установке и эксплуатации

Страница: 4 / 15

756.409 | Z02 | 16.31 4
Permissible configurations:
ATTENTION
Risk of malfunction and damage to system components.
X
Only operate stand-alone inverters of the same type and variant together.
Master Slave
Continuous
AC output
12 V DC input voltage
PI 500-12 - 450 VA
1 x PI 500-12 900 VA
2 x PI 500-12 1350 VA
3 x PI 500-12 1800 VA
24 V DC input voltage
PI 550-24 - 450 VA
1 x PI 550-24 900 VA
2 x PI 550-24 1350 VA
3 x PI 550-24 1800 VA
PI 1100-24 - 900 VA
1 x PI 1100-24 1800 VA
2 x PI 1100-24 2700 VA
3 x PI 1100-24 3600 VA
48 V DC input voltage
PI 1500-48 - 900 VA
1 x PI 1500-48 1800 VA
2 x PI 1500-48 2700 VA
3 x PI 1500-48 3600 VA
The table also applies to the "-60" and "-L60" variants.
1 About these instructions
These operating instructions are part of the product.
X
Read these operating instructions carefully prior to installation and use,
X
keep them near the product during its entire service life,
X
and pass them on to any future owner or user of this product.
1.1 Applicability
These instructions describe the installation, function, operation and maintenance
of the PA Link1 parallel switch box.
Further information on operating the battery system is contained in the Steca
Solarix PI operating instructions.
1.2 Users
These operating instructions are intended for end customers and installers. A techni-
cal expert must be consulted in cases of uncertainty.
Installation, putting into operation, maintenance, and removal of the PA Link1
shall only be done by trained qualified personnel observing the applicable on-
site installation regulations.
EN