Steca PA Link1, Инструкция по установке и эксплуатации

Страница: 12 / 15

756.409 | Z02 | 16.31 12
6 Care, maintenance and service
The device is maintenance-free. If functional faults occur, please consult your
dealer and present the payment receipt/invoice.
X
Before cleaning, switch off all loads and switch off the master via the ro-
tary switch (setting "Off").
X
Clean casing surface periodically using a slightly moistened cloth. Do not
use solvents.
7 Technical data
PA Link1 parallel switch box
Operating temperature 0 °C … +50 °C, under continuous load
Storage temperature -20 °C … +70 °C
Humidity 0 % … 95 % relative humidity, non-condensing
Maximum altitude 2000 m above sea level
Degree of protection IP 20, use in dry environment
Dimensions (W x H x D) 196 mm x 106 mm x 52 mm
Weight 0.8 kg
Connectable devices Maximum of 4 stand-alone inverters of the same
type and variant:
• Solarix PI 500-12 (-60/-L60)
• Solarix PI 550-24 (-60/-L60)
• Solarix PI 1100-24 (-60/-L60)
• Solarix PI 1500-48 (-60/-L60)
Continuous output at AC OUT consumer output, see
table on page 17
Connections • 4 data inputs RJ45 for Solarix PI
• 4 230 V AC or 115 V AC 1) voltage inputs for
Solarix PI
• 230 V AC or 115 V AC 1) consumer output
Connection data, AC OUT terminals
Conductor cross-section,
rigid/flexible Minimum of 0.5 mm 2 to maximum of 16 mm 2
Conductor cross-section,
AWG Minimum of AWG 20 to maximum of AWG 6
Connection data, master/slave terminals
Conductor cross-section,
solid (rigid) Maximum of 4.0 mm 2
Conductor cross-section,
stranded (flexible) Maximum of 2.5 mm 2
Conductor cross-section,
stranded (with ferule) Maximum of 2.5 mm 2
1) The voltage corresponds to the output voltage of the stand-alone inverters.
EN