Steca PA Link1, Инструкция по установке и эксплуатации

Страница: 6 / 15

756.409 | Z02 | 16.31 6
2 Safety
2.1 Proper usage
The PA Link1 parallel switch box is exclusively intended for use in stationary au-
tonomous power supplies in accordance with these operating instructions.
The PA Link1 shall only be operated in a permanently installed and closed condi-
tion.
Only specialists are permitted to carry out the installation.
Any other use is regarded as improper use of the device. Examples of improper
use:
• The PA Link1 parallel switch box must never be connected to the public mains
grid or a generator.
• It is not permitted to operate the PA Link1 parallel switch box without fitted
cover of the terminals, without casing, or with a damaged casing.
• The device may not be installed outdoors.
• An autonomous power supply system (including PA Link1 parallel switch box)
must not be installed, operated or maintained in locations where inflam-
mable gases and vapours can occur, in dusty environments, or in the vicinity
of solvents (danger of fire and explosion: ensure that the room is adequately
ventilated).
• The PA Link1 parallel switch box, inverters and batteries must not be used in
the vicinity of open fires, flames or sparks.
2.2 Other risks
WARNING
Battery acid!
X
Acid splashes on skin or clothing should be immediately treated with soap
suds and rinsed with plenty of water.
X
If acid splashes into the eyes, immediately rinse with plenty of water and seek
medical advice.
2.3 Behaviour in the case of faults
DANGER
• The connected inverters do not appear to function.
• Parallel switch box, inverter, alternating current cable or battery cable
are visibly damaged.
• If there is smoke emission or fluid penetration.
• If parts are loose!
X
In these cases immediately disconnect the inverter from the battery and the
parallel switch box from the loads.
2.4 Exclusion of liability
The manufacturer can neither monitor compliance with this manual nor the
conditions and methods during the installation, operation, usage and mainte-
nance of the parallel switch box. Improper installation of the system may result
in damage to property and, as a consequence, bodily injury.
Therefore, we assume no responsibility or liability for loss, damage or costs
which result from, or are in any way related to, incorrect installation, improper
operation, or incorrect use and maintenance.
Similarly, the manufacturer assumes no responsibility for patent right or other
right infringements of third parties caused by usage of this parallel switch box.
The manufacturer reserves the right to make changes to the product, technical
data or assembly and operating instructions without prior notice.
X
As soon as it is evident that safe operation is no longer possible
(e.g. visible damage), immediately disconnect the inverter from the battery
and the parallel switch box from the loads.
EN