Page 15 of 19
MAINTENANCE
Troubleshooting
Problem
Cause
Solution
There is no power
The battery is not charged
Charge the battery
The battery is not connected
Connect the battery
The switches are turned off
Turn both switches on
No fluid is coming from the
nozzle
There is no power
Charge the battery
The switches are turned off
Turn both switches on
The fluid reservoir is empty
Fill the fluid reservoir with
clean cold water
There is a loose connection in
the pole
Re-attach the heater and all
poles
Fluid is seen but there is no
steam
The Flow Switch is set to ‘R’
Turn to either
•
or
••
There is a loose connection in
the pole
Re-attach heater and all poles
NOTE: If the problem persists, contact the distributor you purchased the machine from or email
quoting your serial number and nature of the problem.
