41
Rip v1. If RIP v1 is selected, routing data will be sent in RIP v1 format. If
Rip V2 is selected, routing data will be sent in RIP v2 format using subnet
broadcasting. If Rip V1 Compatible is selected, routing data will be sent in
RIP v2 format using multicasting. See Fig 1-34.
Figure 1-34: Dynamic Routing
6.3.21
System Password
You can change your Lynx L-510’s username and password by clicking on
User Management. From here you can change the login name and password.
You can also change the idle timeout; you will need to log back onto the
Lynx L-510 once the timeout expires. If you forget your password, you can
press and hold the reset to factory defaults button for 10 seconds (or more).
The Lynx L-510 will reset to its factory default configuration and all custom
configurations will be lost.
Figure 1-35: System Password
