manualshive.com logo in svg

Starbridge Networks ADSL Ethernet & USB Combo Router Lynx L-510, Руководство пользователя


Поделиться
Скачать
background image

                           

                         

24 

 

2.

 

Password: The password for the PPPoE access; this is provided by your 
DSL service provider or your ISP. 

3.

 

On-Demand: Enables on-demand mode. The connection will disconnect 
if no activity is detected after the specified idle timeout value. 

4.

 

Idle Timeout: Specifies that PPPoE connection should disconnect if the 
link has no activity detected for n seconds.  This field is used in 
conjunction with the On-Demand feature. To ensure that the link is 
always active, enter a 0 in this field. 

5.

 

Keep Alive: When on-demand option is not enable, this value specifies 
the time to wait without being connected to your provider before 
terminating the connection. To ensure that the link is always active, 
enter a 0 in this field. 

6.

 

Set Route: Specify this connection as the default-route. 

7.

 

Enforce MTU: Check this box if you experience problems accessing the 
Internet over a PPPoE connection. This feature will force all TCP traffic to 
conform with PPP MTU by changing TCP Maximum Segment Size to PPP 
MTU. 

 

 

Figure 1-14: Quickstart (PPPOE Connection Setup) 

 
 

Содержание ADSL Ethernet & USB Combo Router Lynx L-510




























































Отзывы:

Нет отзывов

Похожие инструкции для ADSL Ethernet & USB Combo Router Lynx L-510

IBM 2210 Installation And Initial Configuration Manual preview
2210
Бренд: IBM Страницы: 72
Paradyne 3163 Quick Reference preview
3163
Бренд: Paradyne Страницы: 16
Watchguard Firebox T15 Quick Start Manual preview
Firebox T15
Бренд: Watchguard Страницы: 39
Supero 6027R-E1R12N User Manual preview
6027R-E1R12N
Бренд: Supero Страницы: 112
NETGEAR FS605 v3 Installation Manual preview
FS605 v3
Бренд: NETGEAR Страницы: 84
Grundig GSS STC 160 Assembly Instruction Manual preview
GSS STC 160
Бренд: Grundig Страницы: 24
3Com 3C13640 Installation Manual preview
3C13640
Бренд: 3Com Страницы: 32
Nilox 16NX071900001 User Manual preview
16NX071900001
Бренд: Nilox Страницы: 66
3Com EtherLink 3C905C-TX User Manual preview
EtherLink 3C905C-TX
Бренд: 3Com Страницы: 96
Intercoax IXWB-450 Quick Start Manual preview
IXWB-450
Бренд: Intercoax Страницы: 2
AirLive Ether-GSH24T v3 Quick Setup Manual preview
Ether-GSH24T v3
Бренд: AirLive Страницы: 2
Xantech IR-X10 Installation Instructions Manual preview
IR-X10
Бренд: Xantech Страницы: 16
ADC HiGain H4TU-R-402 List 5A Quick Installation preview
HiGain H4TU-R-402 List 5A
Бренд: ADC Страницы: 7
Lanner NCA-6520 User Manual preview
NCA-6520
Бренд: Lanner Страницы: 141
WIN Enterprises PL-83300 User Manual preview
PL-83300
Бренд: WIN Enterprises Страницы: 25
Alcatel-Lucent Broadband 700 MHz Brochure preview
Broadband 700 MHz
Бренд: Alcatel-Lucent Страницы: 8
Juniper LN1000 - RELEASE NOTES 8-27-2010 User Manual preview
LN1000 - RELEASE NOTES 8-27-2010
Бренд: Juniper Страницы: 64
NETGEAR ReadyNAS Duo v2 Software Manual preview
ReadyNAS Duo v2
Бренд: NETGEAR Страницы: 100

Бренды по названию

Популярные бренды

Загрузить еще бренды