Starbridge Networks ADSL Ethernet & USB Combo Router Lynx L-510 Скачать руководство пользователя | Manualshive

Страница: 4 / 59

background image

4

Chapter 1

Declaration Of Conformity

Marking by the above symbol indicates compliance with the Essential
Requirements of the R&TTE Directive of the European Union
(1999/5/EC). This equipment meets the following conformance
standards:

EN300 328, EN301 489-17, EN60950

Countries of Operation and Conditions of Use in the
European Community

This device is intends to be operated in all countries of the European
Community. Requirement is for indoors vs. outdoors operation,
license requirements and allowed channels of operation apply in some
countries as described in this document.

If operation is occurring outside of the allowable channels as indicated
in this guide, then the user must cease operating the product and
consult with the local technical support staff responsible for the
wireless network.

This device may be operated indoors or outdoors in all countries of the
European Community using the 2.4GHz band: Channels 1 – 13,
except where noted below:

−

In Italy the end-user must apply for a license from the national
spectrum authority to operate this device outdoors.

−

In France outdoor operation is only permitted using the 2.4 –
2.454 GHz band: Channels 1 – 7.

Note: The user must use the configuration utility provided with this product to
check the current channel of operation and confirm that the devices operating
in conformance with the spectrum usage rules for the European Community
countries as described below.

«
...
2
3
4
5
6
...
»

Содержание ADSL Ethernet & USB Combo Router Lynx L-510




























































Отзывы:

Нет отзывов

Похожие инструкции для ADSL Ethernet & USB Combo Router Lynx L-510

Express Ethernetwork DI-704P

Бренд: D-Link Страницы: 17

Бренд: PaloAlto Networks Страницы: 3

Бренд: Paradyne Страницы: 112

Бренд: Cambium Networks Страницы: 215

Azure StorSimple 8100

Бренд: Microsoft Страницы: 12

Бренд: Enginko Страницы: 19

Бренд: Lancom Страницы: 70

Бренд: Patton electronics Страницы: 12

SteelCentral AppResponse 2180

Бренд: Riverbed Страницы: 82

Бренд: Zhone Страницы: 2

Бренд: National Instruments Страницы: 26

Бренд: Hawking Страницы: 21

TGXPS-1080-M12-MV Series

Бренд: ORiNG Страницы: 2

PXI Terminal Block NI TB-2709

Бренд: National Instruments Страницы: 12

Бренд: LUX LUMEN Страницы: 41

Бренд: Dinstar Страницы: 103

Бренд: Lanpro Страницы: 6

Бренд: Intercel Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды