29
Figure 1-21: Ethernet Switch Configuration
6.3.8
Application (UPnP)
UPnP, NAT and Firewall Traversal allow traffic to pass-thru the Lynx L-510 for
applications using the UPnP protocol. This feature requires one active DSL
connection. In presence of multiple DSL connections, select the one over,
which the incoming traffic will be present, for example the default Internet
connection.
To enable UPnP, you must first have a WAN connection configured. Once a
WAN connection is configured, click Advanced and under Advanced, select
UPnP. You must enable UPnP and then select which connection will utilize
UPnP. In this case the PPPoA connection is enabled. See Fig 1-22.
Figure 1-22: UPnP
